AC110 / AC220
2RB / 4RB / 5RB / 6RB
2500 r/min
30 / 50 / 100 /120 W
492 g
-15。C~60。C / RH85%↓
IP100
E
500V /3mA – 60sec
10MΩ>
DBC
Rated voltage
Motor match
Rated R.P.M
Rated output power
Weight
Using temp. / humidity
Grade of protection
Insulation class
Voltage resistance
Insulation resistance
Motor match
Rated R.P.M
Rated output power
Weight
Using temp. / humidity
Grade of protection
Insulation class
Voltage resistance
Insulation resistance
- Start \ stop (L:start H:stop)
- H :Clockwise\ L : anticlockwise
- Break (H:break L:break relief)
- in\out speeding set up
- ground
- External connection variable resistor or external voltage
- Speed signal output
- Alarm warming output
| AC110V+_15% | ||||||||
Brushless motor compare |
2RB / 4RB / 5RB / 6RB | |||||||
Rated R.P.M |
r/min. | 2500 | ||||||
Max speed |
r/min | 3000 | ||||||
Rated out put |
W | 30 | 50 | 100 | ||||
Rated torque |
N/m (kgf-cm) | 0.12 (1.2) | 0.21(2.1) | 0.4(4) | ||||
Start torque |
N/m (kgf-cm) | 0.15(1.5) | 0.24(2.4) | 0.5(5) | ||||
Speed control range |
r/min | 150~3000 | ||||||
In put |
||||||||
Voltage |
V | AC110+_15% | ||||||
Rated current |
A | 1 | 2.3 | 3 | ||||
Max unput current |
A | 2 | 2.6 | 3.8 | ||||
| AC220V+_15% | ||||||||
Brushless motor compare |
2RB / 4RB / 5RB / 6RB | |||||||
Rated R.P.M |
r/min. | 2500 | ||||||
Max speed |
r/min | 3000 | ||||||
Rated out put |
W | 30 | 50 | 120 | ||||
Rated torque |
N/m (kgf-cm) | 0.12 (1.2) | 0.21(2.1) | 0.4(4) | ||||
Start torque |
N/m (kgf-cm) | 0.15(1.5) | 0.24(2.4) | 0.5(5) | ||||
Speed control range |
r/min | 150~3000 | ||||||
In put |
||||||||
Voltage |
V | AC110+_15% | ||||||
Rated current |
A | 0.7 | 1.4 | 1.8 | ||||
Max unput current |
A | 1.3 | 2 | 2.7 | ||||
Rating of R.P.M fluctuation |
||||||
Loading |
T | +_0.5% | ||||
Voltage |
A | 0.2~4%+_10% | ||||
Temperature |
。C | 0~3%(0~50。C) | ||||
Set up |
||||||
Speeding set up |
1.Inset VR speed hypothesls 2.Exterior VR speed hypothesis 3.Exterior DC voltage control |
|||||
Slow start / stop timer set up |
Time adjustment(0.1~10S), RC charging and discharging principle |
|||||
Signal input |
Over current protection (30w , 3s : 100w , 5s) |
|||||
Protection function |
Over current protection (30w , 3s : 100w , 5s) |
|||||
Low current |
||||||
Over high / low voltage protection (low / high than normal rated 15% / 30%) |
||||||
Signal output |
When Speed out 30p/r, can use for to make the simple position control, |
|||||
JTL Electric Motor Co., Ltd.
Hwa-Ya Technology Park No. 23, Technology 1st Rd.,Kuei-shang Tao-Yuan Shien, Taiwan 33383 TEL: 886. 3. 328. 0789 FAX: 886. 3. 328. 9858